Workhorse

Post Reply
Message
Author
User avatar
A Lutra Continua
Chief Pilot
Chief Pilot
Posts: 2527
Joined: Thu Aug 27, 2015 8:05 am
Location:

Workhorse

#1 Post by A Lutra Continua » Mon Jan 11, 2016 1:27 pm

Landing across the runway at Mary River. Who needs glamour ships on their ticket if you can have this much fun in a workhorse?

[bbvideo=560,315]https://www.youtube.com/watch?v=JwMlgc1saHs[/bbvideo]


Comments from the angry little Froggie toilet trying to convince folks the DHC6 is not STOL are priceless.

User avatar
Stoneboat
Capt
Capt
Posts: 1947
Joined: Sun Aug 23, 2015 9:09 pm
Location: 50-13.5N/66-16.0W
Gender:
Age: 77

Re: Workhorse

#2 Post by Stoneboat » Wed Jan 13, 2016 3:47 am

They have a new strip at Mary River now. A friend goes in and out of there now with the 737. With the gravel kit, of course. ;)

Here's a short clip of one of their 737's landing on the ice strip at the same location. You can see the gravel runway out the right side as they go by.
One has to wonder how much longer that mine will stay open with the price of iron ore the way it is. I think they need around a hundred bucks a ton to make money and it's going for less than half that right now.

[bbvideo=560,315]https://www.youtube.com/watch?v=4YZUDxSomzg[/bbvideo]

User avatar
A Lutra Continua
Chief Pilot
Chief Pilot
Posts: 2527
Joined: Thu Aug 27, 2015 8:05 am
Location:

Re: Workhorse

#3 Post by A Lutra Continua » Thu Jan 14, 2016 7:09 pm

TransAfrik would stick a 727 into gravel strips in Angola. More suited for the job than the 73 I reckon. Acting out a Monty Python sketch by ingesting handfuls of cold gravel can't be good for those donkeys.

User avatar
Ex-Ascot
Test Pilot
Test Pilot
Posts: 13165
Joined: Mon Aug 24, 2015 7:16 am
Location: Botswana but sometimes Greece
Gender:
Age: 68

Re: Workhorse

#4 Post by Ex-Ascot » Sat Jan 23, 2016 6:26 am

Used to operate the VC10 off ice at Sonderstrom. I pointed out to the authorities, that be, many times that it was not performance one and outside limitations in the case of an abort. They decided not to understand and kept sending my crews to that freezing cold desolate place instead of the Caribbean. B@stards.
'Yes, Madam, I am drunk, but in the morning I shall be sober and you will still be ugly.' Sir Winston Churchill.

Sisemen

Re: Workhorse

#5 Post by Sisemen » Sat Jan 23, 2016 9:41 am

Nah......THIS is a workhorse! The flying brick AKA Blackburn Beverley

013resized.JPG
013resized.JPG (55.35 KiB) Viewed 1136 times

User avatar
ian16th
Chief Pilot
Chief Pilot
Posts: 10029
Joined: Fri Aug 28, 2015 9:35 am
Location: KZN South Coast with the bananas
Gender:
Age: 87

Re: Workhorse

#6 Post by ian16th » Sun Jan 24, 2016 8:21 am

Beverley?

Gotta mention, pumping oil! Its a compulsory subject when discussing Bev's.
Cynicism improves with age

User avatar
Alisoncc
Chief Pilot
Chief Pilot
Posts: 4260
Joined: Sat Aug 22, 2015 7:20 am
Location: Arrakis
Gender:
Age: 80

Re: Workhorse

#7 Post by Alisoncc » Sun Jan 24, 2016 9:29 am

I have it on good authority that Blackburn were experimenting with a whole new approach to engine lubrication on the Beverley. The idea was that by spraying oil on to the outside of the engine cowlings, by a process of osmosis, the oil would seep through to the engine bearings supplying precisely the correct quantity of oil required at any specific time. :p

Alison
Rev Mother Bene Gesserit.

Sent from my PDP11/05 running RSX-11D via an ASR33 (TTY)

Sisemen

Re: Workhorse

#8 Post by Sisemen » Sun Jan 24, 2016 12:34 pm

Rumour has it that the UK Government is all excited at the moment in the belief that a vast lake of oil has been discovered under Abingon in Oxfordshire. Nobody has told them it's where the Bev's were parked.

User avatar
Stoneboat
Capt
Capt
Posts: 1947
Joined: Sun Aug 23, 2015 9:09 pm
Location: 50-13.5N/66-16.0W
Gender:
Age: 77

Re: Workhorse

#9 Post by Stoneboat » Sun Jan 24, 2016 9:15 pm

Alisoncc wrote:I have it on good authority that Blackburn were experimenting with a whole new approach to engine lubrication on the Beverley. The idea was that by spraying oil on to the outside of the engine cowlings, by a process of osmosis, the oil would seep through to the engine bearings supplying precisely the correct quantity of oil required at any specific time. :p

Alison
Not unlike the early versions of the Hawker 125 with the Viper engines.
"How much fuel do you need?"
"Check the fuel and fill up the oil."
There was a little mini pump that squirted oil at the number 5 bearing and the engine was required to burn x amount per hour. If it didn't, there was something wrong with the pump and the bearing wasn't being properly lubricated.

Boac
Chief Pilot
Chief Pilot
Posts: 17266
Joined: Fri Aug 28, 2015 5:12 pm
Location: Here

Re: Workhorse

#10 Post by Boac » Sun Jan 24, 2016 10:00 pm

They always said Navigation outbound with a Bev was hard work, but inbound..................... =))

User avatar
Ex-Ascot
Test Pilot
Test Pilot
Posts: 13165
Joined: Mon Aug 24, 2015 7:16 am
Location: Botswana but sometimes Greece
Gender:
Age: 68

Re: Workhorse

#11 Post by Ex-Ascot » Mon Jan 25, 2016 11:03 am

Used to have a dinky little stewardess called Beverly. She didn't need oiling.
'Yes, Madam, I am drunk, but in the morning I shall be sober and you will still be ugly.' Sir Winston Churchill.

Boac
Chief Pilot
Chief Pilot
Posts: 17266
Joined: Fri Aug 28, 2015 5:12 pm
Location: Here

Re: Workhorse

#12 Post by Boac » Mon Jan 25, 2016 1:33 pm

Aah! But did she leak?

MoreAviation

Re: Workhorse

#13 Post by MoreAviation » Wed Jan 27, 2016 10:56 am

Is that Otter in the video the Otter Continua posted an Era Aviation aircraft and if so is the company back on its feet again?
aircraft.JPG

User avatar
A Lutra Continua
Chief Pilot
Chief Pilot
Posts: 2527
Joined: Thu Aug 27, 2015 8:05 am
Location:

Re: Workhorse

#14 Post by A Lutra Continua » Sun Jan 31, 2016 5:48 am

Borek AFAIK.

Post Reply