Chips with everything

Title says it all
Message
Author
User avatar
Woody
Chief Pilot
Chief Pilot
Posts: 10244
Joined: Tue Aug 25, 2015 6:33 pm
Location: Sir Kenny Dalglish Stand
Age: 59

Re: Chips with everything

#21 Post by Woody » Tue Dec 06, 2022 9:09 pm

admin2 wrote:
Tue Dec 06, 2022 9:05 pm
By request - geek corner
=)) =)) =))
When all else fails, read the instructions.

User avatar
Fox3WheresMyBanana
Chief Pilot
Chief Pilot
Posts: 12982
Joined: Thu Sep 03, 2015 9:51 pm
Location: Great White North
Gender:
Age: 61

Re: Chips with everything

#22 Post by Fox3WheresMyBanana » Tue Dec 06, 2022 11:27 pm

Excellent response, Woody!
'Geek'="I don't understand what you do, so I'll insult you to cover up that fact"

On topic.
This year's projects, probably starting in February due to more mechanical works.

1. Use of W5100 ethernet to control electrics in remote building with wired connection.
Basis for project - I have over 100 feet between the building where I park my vehicle and the house.
Lighting does not cover the distance well, and if snow-shifting is needed the timers on auto-switchers isn't long enough.
So, I need to be able to switch on the lights (internal and external) in one building from the other. Lights from both buildings is sufficient.
IR sensor ranges leave too big a gap in the middle.
I can't place lights on poles in the gap. This would increase drifting snow problems. We can get 21 foot high drifting (7 years ago), so this is not a minor problem.
Current plan is an arduino with W5100 Ethernet shield, linked in to each building's electrics via relay boxes.

2. Building the ultimate mousetrap. Using lightbeam sensors and a cheap solenoid catch to trigger a rodent trap.
Basis for project - I live rurally. The commercially available traps are mechanical, optimised for rodent weight.
Problem is that different rodents can access them, leading to either small rodents stealing the bait from larger traps without triggering them, or large rodents shrugging off smaller traps after triggering them.
Plus, some rodents operate daytime, some night-time, and some 24/7.
I want to build a trap that triggers a trapdoor that will trap any rodent.
I have watched every d@mn video on youtube, but the problem is the triggering, not the trap design.
Rodents are field mice, voles, chipmunks, squirrels. It must not trap dogs, cats, skunks or raccoons. These are also around and very beneficial to me for other reasons.
A trap size entrance smaller than 6" square seems to work. I have 5-1/2" square traps I can modify for electronic control.
Outdoor temperature range +37 to -37. Mostly -15 in winter, +23 in summer.

I use Arduino.
Any advice much appreciated.
New PC uses Linux. I haven't used Linux Arduino yet. All my previous stuff was on Windows 7, which PC still works.

User avatar
Opsboi
Chief Pilot
Chief Pilot
Posts: 2718
Joined: Mon Aug 24, 2015 5:37 pm
Location: Watching LHR D-09 E
Gender:

Re: Chips with everything

#23 Post by Opsboi » Tue Dec 06, 2022 11:48 pm

One is baffled

User avatar
Fox3WheresMyBanana
Chief Pilot
Chief Pilot
Posts: 12982
Joined: Thu Sep 03, 2015 9:51 pm
Location: Great White North
Gender:
Age: 61

Re: Chips with everything

#24 Post by Fox3WheresMyBanana » Tue Dec 06, 2022 11:50 pm

Could you be a little more specific?

User avatar
llondel
Chief Pilot
Chief Pilot
Posts: 5912
Joined: Wed Oct 03, 2018 3:17 am
Location: San Jose

Re: Chips with everything

#25 Post by llondel » Wed Dec 07, 2022 12:00 am

Fox3WheresMyBanana wrote:
Tue Dec 06, 2022 11:27 pm
I use Arduino.
Any advice much appreciated.
New PC uses Linux. I haven't used Linux Arduino yet. All my previous stuff was on Windows 7, which PC still works.
The Arduino interface on Linux is pretty much the same as on Windows. You can copy the .ino files from one to the other quite happily and they'll compile just as well. the thing you have to note is that where Windows has COM1, COM2 etc for the serial ports, on a Linux machine it'll probably be /dev/ttyUSB0 or /dev/ttyUSB1 etc. Occasionally one will claim to be /dev/ttyACM0.

When my stock of Arduinos is depleted I'll probably be switching to the STM32 and ESPP32 boards because they are better processors and comparable price to the original Arduino set.

User avatar
Fox3WheresMyBanana
Chief Pilot
Chief Pilot
Posts: 12982
Joined: Thu Sep 03, 2015 9:51 pm
Location: Great White North
Gender:
Age: 61

Re: Chips with everything

#26 Post by Fox3WheresMyBanana » Wed Dec 07, 2022 12:04 am

Many thanks for the quick conversion course!
Just what I was hoping for.

TheGreenAnger
Chief Pilot
Chief Pilot
Posts: 3286
Joined: Fri Jul 15, 2022 11:40 pm
Location: Unfashionable end of the Western Spiral

Re: The really boring and totally pointless snippets thread V

#27 Post by TheGreenAnger » Thu Dec 08, 2022 7:12 am

admin2 wrote:
Tue Dec 06, 2022 8:39 pm
That's very kind of you Admin2, given that there are other kindred spirits here I feel a potential zener breakdown diode moment coming on which will allow the current of our thoughts to flow (backwards if necessary), if we have a separate thread. ;)))
Does that translate?
Thank you Admin2, and thanks to Fox for translating when he realised that you weren't hip to the Zener diode. No Zeno paradox seems to phase him.

You are both hereby inducted into the Guild of Bacchus's Honorable Wine Capacitors! Our motto being "resistentia inanis est!" =))

Most honoured (is there a subscription?) - being of an engineering background I was actually hoping you might have just answered 'yes' or 'no'... :))

"A man piloting a hot air balloon discovers that he has wandered off course and is hopelessly lost. He descends to a lower altitude and locates a man on the ground. He lowers the balloon further and shouts, “Excuse me, can you tell me where I am?”

The man below says, “Yes, you are in a hot air balloon, about thirty feet above this field.”

“You must be an accountant,” says the balloonist.

“Yes I am” replies the man. “And how did you know that”

“Well” says the balloonist, “what you tell me is technically correct, but of no use to anyone.”
=))

PS I have corrected your link
My necessaries are embark'd: farewell. Adieu! I have too grieved a heart to take a tedious leave.

TheGreenAnger
Chief Pilot
Chief Pilot
Posts: 3286
Joined: Fri Jul 15, 2022 11:40 pm
Location: Unfashionable end of the Western Spiral

Re: The really boring and totally pointless snippets thread V

#28 Post by TheGreenAnger » Thu Dec 08, 2022 9:11 am

TheGreenAnger wrote:
Thu Dec 08, 2022 7:12 am
admin2 wrote:
Tue Dec 06, 2022 8:39 pm
That's very kind of you Admin2, given that there are other kindred spirits here I feel a potential zener breakdown diode moment coming on which will allow the current of our thoughts to flow (backwards if necessary), if we have a separate thread. ;)))
Does that translate?
Thank you Admin2, and thanks to Fox for translating when he realised that you weren't hip to the Zener diode. No Zeno paradox seems to phase him.

You are both hereby inducted into the Guild of Bacchus's Honorable Wine Capacitors! Our motto being "resistentia inanis est!" =))

Most honoured (is there a subscription?) - being of an engineering background I was actually hoping you might have just answered 'yes' or 'no'... :))

PS I have corrected your link
This binary thing will never catch on! =))

01001000 01101111 01110111 00100000 01100010 01101111 01110010 01101001 01101110 01100111 00100000 01101100 01101001 01100110 01100101 00100000 01110111 01101111 01110101 01101100 01100100 00100000 01100010 01100101 00100000 01101001 01100110 00100000 01110111 01100101 00100000 01100001 01101100 01101100 00100000 01110111 01110010 01101111 01110100 01100101 00100000 01110100 01101000 01100101 00100000 01110011 01100001 01101101 01100101 00100000 01110111 01100001 01111001 00100001 00100000 01000010 01100101 01110011 01101001 01100100 01100101 01110011 00100000 01101100 01101111 01101111 01101011 00100000 01101000 01101111 01110111 00100000 01101101 01110101 01100011 01101000 00100000 01001001 00100000 01101100 01100101 01100001 01110010 01101110 01100101 01100100 00100000 01100010 01111001 00100000 01101110 01101111 01110100 00100000 01100001 01101110 01110011 01110111 01100101 01110010 01101001 01101110 01100111 00100000 01101010 01110101 01110011 01110100 00100000 00100010 01011001 01100101 01110011 00100000 01101111 01110010 00100000 01001110 01101111 00100010 00101110 00100000 01010111 01101000 01100001 01110100 00100000 01100101 01101110 01100111 01101001 01101110 01100101 01100101 01110010 01101001 01101110 01100111 00100000 01100100 01101001 01110011 01100011 01101001 01110000 01101100 01101001 01101110 01100101 00100000 01100100 01101001 01100100 00100000 01111001 01101111 01110101 00100000 01100110 01101111 01101100 01101100 01101111 01110111 00111111 00100000

As for the rest, you will find that I am incorrigible!

PS - Feel free to answer the question asked above in English if you want! ;)))
My necessaries are embark'd: farewell. Adieu! I have too grieved a heart to take a tedious leave.

User avatar
admin2
Capt
Capt
Posts: 734
Joined: Sun Aug 23, 2015 4:13 pm
Location:

Re: Chips with everything

#29 Post by admin2 » Thu Dec 08, 2022 9:47 am

01000001 01100101 01110010 01101111 01101110 01100001 01110101 01110100 01101001 01100011 01110011 00101110 00100000 01000100 01101111 01101110 00100111 01110100 00100000 01100110 01101111 01110010 01100111 01100101 01110100 00100000 01110100 01101000 01100101 01110010 01100101 00100000 01100001 01110010 01100101 00100000 01110100 01110111 01101111 00100000 01110011 01101001 01100100 01100101 01110011 00100000 01110100 01101111 00100000 01100101 01110110 01100101 01110010 01111001 01110100 01101000 01101001 01101110 01100111 00101110

TheGreenAnger
Chief Pilot
Chief Pilot
Posts: 3286
Joined: Fri Jul 15, 2022 11:40 pm
Location: Unfashionable end of the Western Spiral

Re: Chips with everything

#30 Post by TheGreenAnger » Thu Dec 08, 2022 10:04 am

admin2 wrote:
Thu Dec 08, 2022 9:47 am
01000001 01100101 01110010 01101111 01101110 01100001 01110101 01110100 01101001 01100011 01110011 00101110 00100000 01000100 01101111 01101110 00100111 01110100 00100000 01100110 01101111 01110010 01100111 01100101 01110100 00100000 01110100 01101000 01100101 01110010 01100101 00100000 01100001 01110010 01100101 00100000 01110100 01110111 01101111 00100000 01110011 01101001 01100100 01100101 01110011 00100000 01110100 01101111 00100000 01100101 01110110 01100101 01110010 01111001 01110100 01101000 01101001 01101110 01100111 00101110
01001001 00100000 01110011 01101000 01101111 01110101 01101100 01100100 00100000 01101000 01100001 01110110 01100101 00100000 01100111 01110101 01100101 01110011 01110011 01100101 01100100 00100000 01110100 01101000 01100101 00100000 01100001 01100101 01110010 01101111 01101110 01100001 01110101 01110100 01101001 01100011 01110011 00100000 01100110 01101001 01100101 01101100 01100100 00101110 00100000 01000001 01110011 00100000 01100110 01101111 01110010 00100000 01110100 01101000 01100101 00100000 01110100 01110111 01101111 00100000 01110011 01101001 01100100 01100101 01110011 00100000 01110100 01101000 01101001 01101110 01100111 00101100 00100000 01001001 00100000 01100111 01110101 01100101 01110011 01110011 00100000 01110011 01101111 00100000 01110101 01101110 01101100 01100101 01110011 01110011 00100000 01101111 01101110 01100101 00100000 01101100 01101001 01110110 01100101 01110011 00100000 01101001 01101110 00100000 01100001 00100000 00100000 01110100 01110111 01101111 00100000 01100100 01101001 01101101 01100101 01101110 01110011 01101001 01101111 01101110 01100001 01101100 00100000 01110101 01101110 01101001 01110110 01100101 01110010 01110011 01100101 00101110 00100000

Never has a post been so apt to a computer chatter thread! ;)))
My necessaries are embark'd: farewell. Adieu! I have too grieved a heart to take a tedious leave.

talmacapt
Capt
Capt
Posts: 650
Joined: Fri Aug 06, 2021 9:29 am
Location: Finland
Gender:

Re: Chips with everything

#31 Post by talmacapt » Thu Dec 08, 2022 3:29 pm

Perhaps ex-asciiot may consider a reply.

Boac
Chief Pilot
Chief Pilot
Posts: 17207
Joined: Fri Aug 28, 2015 5:12 pm
Location: Here

Re: Chips with everything

#32 Post by Boac » Thu Dec 08, 2022 4:11 pm

I'm waiting for Arthur.

TheGreenAnger
Chief Pilot
Chief Pilot
Posts: 3286
Joined: Fri Jul 15, 2022 11:40 pm
Location: Unfashionable end of the Western Spiral

Re: Chips with everything

#33 Post by TheGreenAnger » Fri Dec 09, 2022 6:31 am

Boac wrote:
Thu Dec 08, 2022 4:11 pm
I'm waiting for Arthur.
:YMAPPLAUSE:

I have always wanted a pair of glasses like those wot he had.

As for ASCII, I am more of an IBM EBCDIC man myself but, I guess I might have made a bigger dick of myself by posting in that... ;)))
My necessaries are embark'd: farewell. Adieu! I have too grieved a heart to take a tedious leave.

PHXPhlyer
Chief Pilot
Chief Pilot
Posts: 8239
Joined: Sun Jun 17, 2018 2:56 pm
Location: PHX
Gender:
Age: 69

Re: Chips with everything

#34 Post by PHXPhlyer » Fri Dec 09, 2022 4:48 pm

Waiting for translation.
Google TranslateTM wouldn't do it.

PP

Karearea
Chief Pilot
Chief Pilot
Posts: 4746
Joined: Thu Sep 10, 2015 5:47 am
Location: The South Island, New Zealand

Re: Chips with everything

#35 Post by Karearea » Fri Dec 09, 2022 7:44 pm

PHXPhlyer wrote:
Fri Dec 09, 2022 4:48 pm
Waiting for translation.
Google TranslateTM wouldn't do it.

PP
Try https://www.convertbinary.com/to-text/
And with the morn, those angel faces smile...

PHXPhlyer
Chief Pilot
Chief Pilot
Posts: 8239
Joined: Sun Jun 17, 2018 2:56 pm
Location: PHX
Gender:
Age: 69

Re: Chips with everything

#36 Post by PHXPhlyer » Fri Dec 09, 2022 8:51 pm

Thanks.
Bit disappointed.
Had hoped for a pithy exchange.

PP

Boac
Chief Pilot
Chief Pilot
Posts: 17207
Joined: Fri Aug 28, 2015 5:12 pm
Location: Here

Re: Chips with everything

#37 Post by Boac » Fri Dec 09, 2022 8:55 pm

What a pithy. Sorry to disappoint. :))

TheGreenAnger
Chief Pilot
Chief Pilot
Posts: 3286
Joined: Fri Jul 15, 2022 11:40 pm
Location: Unfashionable end of the Western Spiral

Re: Chips with everything

#38 Post by TheGreenAnger » Sat Dec 10, 2022 9:41 am

Methinks somebody is taking the pith!
My necessaries are embark'd: farewell. Adieu! I have too grieved a heart to take a tedious leave.

Post Reply