I hope I have sorted out the circuitry here correctly, but wish I had not had that extra glass of wine.............
![Rolling on the floor =))](./images/smilies/24.gif)
#define LED_PIN 13Fox3WheresMyBanana wrote: ↑Mon Dec 05, 2022 2:01 amI would be interested in the code, if you could. Is it on Github?
namespace GoodbyeWorld'Comment - ACHTUNG! ALLES LOOKENSPEEPERS!
Das computermachine ist nicht fuer gefingerpoken und mitten grabben.
Ist easy schnappen der springen werk, blowenfusen und poppencorken mit spitzensparken.
Ist nicht fuer gewerken bei das dumpkopfen.
Das rubbernecken sichtseeren keepen das cotten-pickenen hans in das pockets muss; relaxen und watchen das blinkenlichten.
We’ve trained a model called ChatGPT which interacts in a conversational way. The dialogue format makes it possible for ChatGPT to answer followup questions, admit its mistakes, challenge incorrect premises, and reject inappropriate requests. ChatGPT is a sibling model to InstructGPT, which is trained to follow an instruction in a prompt and provide a detailed response.
I think it's this one. https://github.com/FastLED/FastLED/blob ... alette.inoFox3WheresMyBanana wrote: ↑Mon Dec 05, 2022 2:01 amI would be interested in the code, if you could. Is it on Github?
Has anybody here serially linked the Raspberry Pi using the Thonny Python IDE and the Arduino IDE (C++ code framework)?llondel wrote: ↑Mon Dec 05, 2022 1:47 amEvening all, the rain departed early, so it was relatively warm and sunny for most of today. I took the opportunity to put up the external lights. I use the waterproof LED strips, 5m long, and this year bought a complete new set, which is just as well because the previous set took some damage this year. Previously I'd had two of them driven from an Arduino, but this year I installed five strips across the whole width of the house and tweaked the Arduino code slightly to cope with the extras. Looks fairly good.
I also figured out how the code works, so in theory I could put up Halloween colours for next year too.
Cheers talmacapt, I eventually found a very good site that clearly sets out how to link the two cards serially. Precisely what I was looking for.
You are onto something there as it seems brings all the flexibility of the microcontroller and the ARM processor onto one board with all of the following without the need to serially connect two devices/boards.talmacapt wrote: ↑Tue Dec 06, 2022 12:05 pmTGA
I have read your link and it got me thinking that what may, possibly, be simpler is to use a raspberrypi pico board and, perhaps, do away with the arduino.
I had not appreciated what the pico does but my interest is now piqued.
Something to keep me occupied when it is cold outside.
1 mm × 51 mm form factor
RP2040 microcontroller chip designed by Raspberry Pi in the UK
Dual-core Arm Cortex-M0+ processor, flexible clock running up to 133 MHz
264kB on-chip SRAM
2MB on-board QSPI flash
2.4GHz 802.11n wireless LAN (Raspberry Pi Pico W and WH only)
26 multifunction GPIO pins, including 3 analogue inputs
2 × UART, 2 × SPI controllers, 2 × I2C controllers, 16 × PWM channels
1 × USB 1.1 controller and PHY, with host and device support
8 × Programmable I/O (PIO) state machines for custom peripheral support
Supported input power 1.8–5.5V DC
Operating temperature -20°C to +85°C (Raspberry Pi Pico and Pico H); -20°C to +70°C (Raspberry Pi Pico W and Pico WH)
Castellated module allows soldering direct to carrier boards (Raspberry Pi Pico and Pico W only)
Drag-and-drop programming using mass storage over USB
Low-power sleep and dormant modes
Accurate on-chip clock
Temperature sensor
Accelerated integer and floating-point libraries on-chip
That's very kind of you Admin2, given that there are other kindred spirits here I feel a potential zener breakdown diode moment coming on which will allow the current of our thoughts to flow (backwards if necessary), if we have a separate thread.
And then of course I’ve got this terrible pain in all the diodes down my left side.”
We shall have to rectify that which ails you Woody!
Does that translate?That's very kind of you Admin2, given that there are other kindred spirits here I feel a potential zener breakdown diode moment coming on which will allow the current of our thoughts to flow (backwards if necessary), if we have a separate thread.